User's Manual
5#
Conguring PPTP
PPTP PointtoPoint Tunnelling Protocol is used in association
fith virtual private netforks EP=s. There are tfo parts to
a PPTP connection: the FA= interface settings and the PPTP
settings.
To vief the PPTP settings, click Internet, then click PPTP.
WAN InterUace Settings
Dyna\ic IP Address
WAN InterUace Type
Select 3ynamic IP Address to assign an IP address provided Qy an
ISP.
Hostna\e
Enter a host name of an ISP. optional.
Clone MAC
Enter the <A2 address of the computer’s or taQlet’s emQedded
=etfork Interface 2ard =I2 in the <A2 address eld and click
Clone MAC.
Note: Some ISP providers re`uire registering the <A2 address of
the netfork interface card =I2 connected directly to the caQle or
3SL modem. 2lone <A2 masks the router’s <A2 address fith the
<A2 address of the computer’s =I2.