User's Manual
#3
Enable Static DHCP IP
There are reasons fhy you may fant to enaQle a static IP
address on a client device on your ESR router’s netfork.
>n occasion, if there are pofer outages or if you’ve recongured
the settings on your ESR router and reQoot restart it to apply
the nef settings, the previous IP address that the router’s 3H2P
server assigned to one or more devices on the netfork may have
changed. Some client devices on your netfork may also have
feQ conguration interfaces set top Qoges, =etfork Attached
Storage, etc. that are accessiQle from the router’s assigned
IP address from its 3H2P server, so the client device can Qe
managed. Thus if the client device’s IP address changes from
time to time, it may Qe difcult linking to it unless you nd its
nef address through the ESR router’s 3H2P 2lient TaQle.
If you fish to avoid this, then the EnaQle Static 3H2P IP option
allofs you set a static essentially a permanent address for
given client devices on your netfork.
To do so, select the Enable Static DHCP IP option.
IP Address
Enter the IP address of the device to add as a static 3H2P client.
MAC Address
Enter the <A2 address of the device to add as a static 3H2P
client.
2lick Add to add the device to the static 3H2P client taQle or
Reset to return the taQle to its previous state.