User's Manual
#
Conguring the LAN
(Local Area Network)
The settings on this page allof you to congure the fired
netfork settings. 3evices connected to the router’s Ethernet
ports comprise its LA=. The router’s IP is dened in the IP
Address eld. The default setting of the 3H2P server is set
to Enabled so that netforked clients computers, home
entertainment components, printers, etc. fill automatically Qe
assigned IP addresses Qy the router.
<ore advanced users may fish to congure the 3=S server
settings to meet their specic re`uirements. 2hanging the
settings in this section are not necessary for most situations.
To vief the LA= settings, click Syste\ then click LAN.
Note: Keep the router’s default values if you are uncertain of
the settings values.
LAN IP
IP Address
For conguring the router’s LA= IP address.
IP Subnet Mask
For conguring the router’s LA= SuQnet <ask
802.1d Spanning Tree
Spanning Tree is disaQled Qy default. Fhen enaQled, Spanning
Tree prevents netfork loops transmissions fon’t pass the
same node tfice or several times to reach the destination.
=ote:
The default device IP address is 192.16'..1.