User's Manual

3
Setting Your Router{s Ti\e Zone
Setup date and time syncroniiation on the ESR Series Router
fith a computer or an =etfork Time Protocol =TP server.
To synchroniie date and time settings fith a computer, follof
these steps:
1. Select Synchroniie fith P2 computer from the Ti\e Setup
dropdofn list. The date and time values are shofn in the PC
Date and Ti\e tegt eld.
2. 2lick Prev to return to the previous screen, Apply to save the
settings, or Cancel to stop the procedure.
To synchroniie the date and time settings fith an =TP server,
follof these steps:
1. Select Synchronize fith =TP Server from the Ti\e Setup
dropdofn list.
2. Select a time ione value from the Ti\e Zone dropdofn list.
3. Enter an IP address or domain name of an =TP server in the
NTP Server tegt
eld.
#. 2lick the Enable Daylight Savings check Qog to enaQle or
disaQle daylight savings time.
5. Select the date and time values fhen daylights savings
time starts in the Start Ti\e dropdofn lists.