User's Manual

2'
Setting fireless encryption.
To encrypt the fireless signal in the ESR3 router, follof these
steps:
1. Enter the router name in the fireless =ame SSI3 tegt eld.
2. Select the security level from the Encryption dropdofn list.
3. Enter a passford in the Encryption Key tegt eld.
#. Repeat steps 1 through 3 to encrypt the Qand
5. 2lick Next to continue, Prev to return to the previous screen, or
Cancel to stop the procedure.
Setting Your Wireless Security
I\portant: To ensure the netfork is secure, it is
recommended to select High for an encryption level.