User's Manual
Table Of Contents
- Table of Contents
- Product Overview
- Installation
- EnGenius Quick Start
- Web Configuration
- Installation Setup Wizard
- Basic Network Settings
- Wireless Services
- Appendix A
- Appendix B
- Appendix C
- Appendix D
INSTALLATION WALL MOUNTING
2-2
2.2 Wall Mounting
Mounting the ESR600 Series Router on a wall optimizes the
wireless access range.
To mount the device on the wall do the following:
1. Measure the distance from the middle of each mounting
screw hole.
2. Mark the locations of the screw holes on the wall.
3. Drill a hole for each marked location and insert a screw in
each.
4. Install and secure the mounts onto the ESR600 Series
Router.
5. Install the ESR600 Series Router on the wall.
Note:
Choose a location that is within reach of an electrical
outlet for the AC adapter and the DSL or Cable modem.
Note:
Make sure to leave enough of the screw head above the
wall surface to secure the ESR600 Series Router.