User's Manual
Table Of Contents
- ESR600H/ESR750H Dual Concurrent Wireless Media Router
- Table of Contents
- Conventions
- Copyright
- Product Overview
- Installation
- EnGenius Quick Start
- Web Configuration
- Installation Setup Wizard
- Basic Network Settings
- 6.1 System Setup
- 6.2 Configuring WAN Settings
- 6.3 Wireless 2.4G LAN Setup
- 6.4 Wireless LAN 5G Setup
- 6.5 Firewall Setup
- 6.6 Virtual Private Network Setup
- 6.7 Advanced Network Settings
- 6.7.1 NAT Setup
- 6.7.2 Port Mapping Setup
- 6.7.3 Port Forwarding Setup
- 6.7.4 Port Triggering Setup
- 6.7.5 Application Layer Gateway Setup
- 6.7.6 Universal Plug and Play Setup
- 6.7.7 Internet Group Multicast Protocol Setup
- 6.7.8 Quality of Service Setup
- 6.7.9 Routing Setup
- 6.7.10 Wake on LAN Setup
- 6.7.11 USB Port Setup
- 6.8 Tools Setup
- USB Services
- Appendix A
- Appendix B
- Appendix C
- Appendix D

BASIC NETWORK SETTINGS WIRELESS LAN 5G SETUP
ESR600H/ESR750H 6-41 USER GUIDE
Access Point Mode
Configure the wireless settings of the router in access point mode.
Wireless Distribution System Mode
Configure the wireless settings of the router in WDS mode.
Band: Select a wireless standard for the network from the
following options:
5 GHz (802.11 a)
5 GHz (802.11 n)
5 GHz (802.11 a/n)
Enable SSID# Select the number of wireless groups,
between one and four, available on the network.
SSID[#] Enter the name of the wireless network(s).
Auto Channel Enable or disable having the router auto-
matically select a channel for the wireless network. Auto
channel is enabled by default. Select disable to manually
assign a specific channel. (Default = Disable)
Check Channel Time When auto channel is enabled,
select time period that the system checks the appropri-
ate channel for the router.
Channel When auto channel is disabled, select a
channel to assign to the wireless network.