User's Manual
Table Of Contents
- ESR600H/ESR750H Dual Concurrent Wireless Media Router
- Table of Contents
- Conventions
- Copyright
- Product Overview
- Installation
- EnGenius Quick Start
- Web Configuration
- Installation Setup Wizard
- Basic Network Settings
- 6.1 System Setup
- 6.2 Configuring WAN Settings
- 6.3 Wireless 2.4G LAN Setup
- 6.4 Wireless LAN 5G Setup
- 6.5 Firewall Setup
- 6.6 Virtual Private Network Setup
- 6.7 Advanced Network Settings
- 6.7.1 NAT Setup
- 6.7.2 Port Mapping Setup
- 6.7.3 Port Forwarding Setup
- 6.7.4 Port Triggering Setup
- 6.7.5 Application Layer Gateway Setup
- 6.7.6 Universal Plug and Play Setup
- 6.7.7 Internet Group Multicast Protocol Setup
- 6.7.8 Quality of Service Setup
- 6.7.9 Routing Setup
- 6.7.10 Wake on LAN Setup
- 6.7.11 USB Port Setup
- 6.8 Tools Setup
- USB Services
- Appendix A
- Appendix B
- Appendix C
- Appendix D

BASIC NETWORK SETTINGS WIRELESS 2.4G LAN SETUP
ESR600H/ESR750H 6-27 USER GUIDE
Wireless Distribution System Mode
Configure the router’s wireless settings in WDS mode.
Channel Select a channel to assign to the wireless net-
work. Valid value are from one to eleven in the US and
one to thirteen in the EU.
MAC Address [#] Enter the MAC address(es) for the
wireless access point(s) that are part of the WDS.
WDS Data Rate Select the data rate for the WDS.
Set Security Click Set Security to display the WDS
security settings screen. For security configuration set-
tings, refer to “WDS Security Settings Screen” on page 6-
28.
Click Apply to save the settings or Cancel to discard
changes.