User's Manual
Table Of Contents
- ESR600H/ESR750H Dual Concurrent Wireless Media Router
- Table of Contents
- Conventions
- Copyright
- Product Overview
- Installation
- EnGenius Quick Start
- Web Configuration
- Installation Setup Wizard
- Basic Network Settings
- 6.1 System Setup
- 6.2 Configuring WAN Settings
- 6.3 Wireless 2.4G LAN Setup
- 6.4 Wireless LAN 5G Setup
- 6.5 Firewall Setup
- 6.6 Virtual Private Network Setup
- 6.7 Advanced Network Settings
- 6.7.1 NAT Setup
- 6.7.2 Port Mapping Setup
- 6.7.3 Port Forwarding Setup
- 6.7.4 Port Triggering Setup
- 6.7.5 Application Layer Gateway Setup
- 6.7.6 Universal Plug and Play Setup
- 6.7.7 Internet Group Multicast Protocol Setup
- 6.7.8 Quality of Service Setup
- 6.7.9 Routing Setup
- 6.7.10 Wake on LAN Setup
- 6.7.11 USB Port Setup
- 6.8 Tools Setup
- USB Services
- Appendix A
- Appendix B
- Appendix C
- Appendix D
BASIC NETWORK SETTINGS CONFIGURING L2TP
ESR600H/ESR750H 6-24 U
SER GUIDE
L2TP Settings
User Name Enter the username assigned by an ISP.
Password: Enter the password assigned by an ISP.
Service IP Address: Enter the L2TP server IP address
provided by an ISP.
Connection ID: Enter the connection ID provided by an
ISP (optional).
MTU Enter the maximum transmission unit (MTU). The
MTU specifies the largest packet size (Default: 1460) per-
mitted for an internet transmission. The MTU size can be
set between 512 and 1492.
Type Configure the connection type between the router
and the ISP. Choose between Keep Connection,
Automatic Connection or Manual Connection.
Idle Timeout Configure the maximum amount of time, in
minutes, allowed for inactive Internet connection. The
Internet connection will be dropped when the maximum
idle time is reached. Valid values are between one and
one thousand.
Click Apply to save the settings or Cancel to discard the
changes.