User's Manual
Table Of Contents
- ESR600H/ESR750H Dual Concurrent Wireless Media Router
- Table of Contents
- Conventions
- Copyright
- Product Overview
- Installation
- EnGenius Quick Start
- Web Configuration
- Installation Setup Wizard
- Basic Network Settings
- 6.1 System Setup
- 6.2 Configuring WAN Settings
- 6.3 Wireless 2.4G LAN Setup
- 6.4 Wireless LAN 5G Setup
- 6.5 Firewall Setup
- 6.6 Virtual Private Network Setup
- 6.7 Advanced Network Settings
- 6.7.1 NAT Setup
- 6.7.2 Port Mapping Setup
- 6.7.3 Port Forwarding Setup
- 6.7.4 Port Triggering Setup
- 6.7.5 Application Layer Gateway Setup
- 6.7.6 Universal Plug and Play Setup
- 6.7.7 Internet Group Multicast Protocol Setup
- 6.7.8 Quality of Service Setup
- 6.7.9 Routing Setup
- 6.7.10 Wake on LAN Setup
- 6.7.11 USB Port Setup
- 6.8 Tools Setup
- USB Services
- Appendix A
- Appendix B
- Appendix C
- Appendix D
BASIC NETWORK SETTINGS SYSTEM SETUP
ESR600H/ESR750H 6-1 USER GUIDE
6.1 System Setup
6.1.1 Viewing System Status
The status page shows the summary of the current system status including system (hardware/software version, date/time),
Internet connection (WAN), wired network (LAN) and wireless network (WLAN) information.
System
Model The model name of the ESR600H/ESR750H.
Mode The router’s operating mode (AP / Router / WDS).
Uptime The amount of time the device has been active.
Current Date/Time The current system date and time.
Hardware Version The hardware version number of the
ESR600H/ESR750H.
Serial Number The serial number of the ESR600H/ESR750H.
The serial number is required for customer service or support.
Application Version The firmware version number of the
ESR600H/ESR750H.
Note:
To update the firmware visit www.engeniusnetworks.com.