User's Manual
Table Of Contents
- ESR600H/ESR750H Dual Concurrent Wireless Media Router
- Table of Contents
- Conventions
- Copyright
- Product Overview
- Installation
- EnGenius Quick Start
- Web Configuration
- Installation Setup Wizard
- Basic Network Settings
- 6.1 System Setup
- 6.2 Configuring WAN Settings
- 6.3 Wireless 2.4G LAN Setup
- 6.4 Wireless LAN 5G Setup
- 6.5 Firewall Setup
- 6.6 Virtual Private Network Setup
- 6.7 Advanced Network Settings
- 6.7.1 NAT Setup
- 6.7.2 Port Mapping Setup
- 6.7.3 Port Forwarding Setup
- 6.7.4 Port Triggering Setup
- 6.7.5 Application Layer Gateway Setup
- 6.7.6 Universal Plug and Play Setup
- 6.7.7 Internet Group Multicast Protocol Setup
- 6.7.8 Quality of Service Setup
- 6.7.9 Routing Setup
- 6.7.10 Wake on LAN Setup
- 6.7.11 USB Port Setup
- 6.8 Tools Setup
- USB Services
- Appendix A
- Appendix B
- Appendix C
- Appendix D
WEB CONFIGURATION WEB MENUS OVERVIEW
ESR600H/ESR750H 4-10 USER GUIDE
Advanced
View and configure advanced system and network settings.
NAT Enable or disable Network Address Translation (NAT).
Port Mapping Re-direct a range of service port numbers to a specified LAN IP address.
Port Forwarding Configure server applications to send and receive data from specific ports
on the network.
Port Triggering Configure applications that require multiple connections and different
inbound and outbound connections.
ALG Configure the application layer gateway (ALG).
UPnP Enable or disable Universal Plug and Play (UPnP) functionality.
IGMP Enable or disable the Internet Group Multicast Protocol (IGMP).
QoS Configure the network quality of service (QoS) setting by prioritizing the uplink and
downlink bandwidth.
Routing Configure static routing.
WOL Configure wake on LAN (WOL) to turn on a computer over the network.
USB port Configure the router’s USB port to server or NetUSB mode.