User's Manual
Table Of Contents
- ESR600H/ESR750H Dual Concurrent Wireless Media Router
- Table of Contents
- Conventions
- Copyright
- Product Overview
- Installation
- EnGenius Quick Start
- Web Configuration
- Installation Setup Wizard
- Basic Network Settings
- 6.1 System Setup
- 6.2 Configuring WAN Settings
- 6.3 Wireless 2.4G LAN Setup
- 6.4 Wireless LAN 5G Setup
- 6.5 Firewall Setup
- 6.6 Virtual Private Network Setup
- 6.7 Advanced Network Settings
- 6.7.1 NAT Setup
- 6.7.2 Port Mapping Setup
- 6.7.3 Port Forwarding Setup
- 6.7.4 Port Triggering Setup
- 6.7.5 Application Layer Gateway Setup
- 6.7.6 Universal Plug and Play Setup
- 6.7.7 Internet Group Multicast Protocol Setup
- 6.7.8 Quality of Service Setup
- 6.7.9 Routing Setup
- 6.7.10 Wake on LAN Setup
- 6.7.11 USB Port Setup
- 6.8 Tools Setup
- USB Services
- Appendix A
- Appendix B
- Appendix C
- Appendix D
WIRELESS SERVICES SAMBA
ESR600H/ESR750H 7-29 USER GUIDE
Using Shared Storage by USB Server Mode for Windows
1. Connect a USB storage device to this product.
2. Select My Network Places.
3. Click Display the Computers of Workgroup.
4. Double click the Microsoft Windows Network icon.
5. Double click the Workgroup that the Server belongs to. The default Workgroup name is “WORKGROUP”. You can refer
to Control Center or the Server’s web pages to get it. You will see that the Server is displayed as its server name.
6. If you cannot find Workgroup name of the Server in Microsoft Windows Network, you can select Search for Computer…
in My Network Places and enter the Server Name of the Server to find it.
7. Double click this Server Name icon.
8. The shared folders will be listed as sdax where x represents the x-th disk with respect to the USB port.
9. Perform Open, Paste, Remove or Copy the files to the shared folders.
Note:
If you use SMB on Windows 98 SE/ME, you must login to your Windows 98 SE/ME using the same user name
as in the Server’s User Account.