User's Manual
Table Of Contents
- ESR600H/ESR750H Dual Concurrent Wireless Media Router
- Table of Contents
- Conventions
- Copyright
- Product Overview
- Installation
- EnGenius Quick Start
- Web Configuration
- Installation Setup Wizard
- Basic Network Settings
- 6.1 System Setup
- 6.2 Configuring WAN Settings
- 6.3 Wireless 2.4G LAN Setup
- 6.4 Wireless LAN 5G Setup
- 6.5 Firewall Setup
- 6.6 Virtual Private Network Setup
- 6.7 Advanced Network Settings
- 6.7.1 NAT Setup
- 6.7.2 Port Mapping Setup
- 6.7.3 Port Forwarding Setup
- 6.7.4 Port Triggering Setup
- 6.7.5 Application Layer Gateway Setup
- 6.7.6 Universal Plug and Play Setup
- 6.7.7 Internet Group Multicast Protocol Setup
- 6.7.8 Quality of Service Setup
- 6.7.9 Routing Setup
- 6.7.10 Wake on LAN Setup
- 6.7.11 USB Port Setup
- 6.8 Tools Setup
- USB Services
- Appendix A
- Appendix B
- Appendix C
- Appendix D
ADVANCED NETWORK SETTINGS QUALITY OF SERVICE SETUP
ESR600H/ESR750H 6-85 USER GUIDE
Bandwidth Allocation
Set network resource usage, for inbound and outbound traffic, based on local IP and port ranges.
Type Select Download or Upload to specific the direc-
tion of packet traffic.
Local IP Range Enter the local IP range of the current
configuration.
Protocol Select the protocol to manage for the current
configuration.
Port Range Enter the local port range of the current con-
figuration.
Policy Select Min or Max to specify the type of configu-
ration policy.
Rate (bps): Select the bandwidth rate, in bits per second
(bps), of the current configuration.
Click Add to save the settings and list the configuration in the
Current QoS table or Reset the discard changes.
Click Apply to save the settings or Cancel to discard
changes.