User's Manual
Table Of Contents
- ESR600H/ESR750H Dual Concurrent Wireless Media Router
- Table of Contents
- Conventions
- Copyright
- Product Overview
- Installation
- EnGenius Quick Start
- Web Configuration
- Installation Setup Wizard
- Basic Network Settings
- 6.1 System Setup
- 6.2 Configuring WAN Settings
- 6.3 Wireless 2.4G LAN Setup
- 6.4 Wireless LAN 5G Setup
- 6.5 Firewall Setup
- 6.6 Virtual Private Network Setup
- 6.7 Advanced Network Settings
- 6.7.1 NAT Setup
- 6.7.2 Port Mapping Setup
- 6.7.3 Port Forwarding Setup
- 6.7.4 Port Triggering Setup
- 6.7.5 Application Layer Gateway Setup
- 6.7.6 Universal Plug and Play Setup
- 6.7.7 Internet Group Multicast Protocol Setup
- 6.7.8 Quality of Service Setup
- 6.7.9 Routing Setup
- 6.7.10 Wake on LAN Setup
- 6.7.11 USB Port Setup
- 6.8 Tools Setup
- USB Services
- Appendix A
- Appendix B
- Appendix C
- Appendix D
ADVANCED NETWORK SETTINGS QUALITY OF SERVICE SETUP
ESR600H/ESR750H 6-84 USER GUIDE
Priority Queue
Set network resource usage based on specific protocols or port ranges. Incoming packets are processed based on the proto-
cols’ position within the queue.
Unlimited Priority Queue
Local IP Address Enter the local IP address of a device
on the network. This device’s activity is not restricted by
the QoS feature.
High/Low Priority Queue: Specify the priority for differ-
ent protocols. Additional protocols and port ranges can be
added.