User's Manual
Table Of Contents
- ESR600H/ESR750H Dual Concurrent Wireless Media Router
- Table of Contents
- Conventions
- Copyright
- Product Overview
- Installation
- EnGenius Quick Start
- Web Configuration
- Installation Setup Wizard
- Basic Network Settings
- 6.1 System Setup
- 6.2 Configuring WAN Settings
- 6.3 Wireless 2.4G LAN Setup
- 6.4 Wireless LAN 5G Setup
- 6.5 Firewall Setup
- 6.6 Virtual Private Network Setup
- 6.7 Advanced Network Settings
- 6.7.1 NAT Setup
- 6.7.2 Port Mapping Setup
- 6.7.3 Port Forwarding Setup
- 6.7.4 Port Triggering Setup
- 6.7.5 Application Layer Gateway Setup
- 6.7.6 Universal Plug and Play Setup
- 6.7.7 Internet Group Multicast Protocol Setup
- 6.7.8 Quality of Service Setup
- 6.7.9 Routing Setup
- 6.7.10 Wake on LAN Setup
- 6.7.11 USB Port Setup
- 6.8 Tools Setup
- USB Services
- Appendix A
- Appendix B
- Appendix C
- Appendix D
BASIC NETWORK SETTINGS CONFIGURING A VPN TUNNEL PROFILE
ESR600H/ESR750H 6-69 USER GUIDE
L2TP
On the L2TP tab, enter the following information:
Authentication: there are three authentication algo-
rithms. Please select CHAP, PAP, or MSCHAP_V2.
Available Users/Member: The users who you created in
the User Setting to connect to L2TP server will be dis-
played. Select the users in the list who you wish to
include in the VPN tunnel, and click the forward arrow to
then add them to the Member Box. Click the backward
arrow if you want to remove users from the Member box.
Click Add to manually add available users.