User's Manual
Table Of Contents
- ESR600H/ESR750H Dual Concurrent Wireless Media Router
- Table of Contents
- Conventions
- Copyright
- Product Overview
- Installation
- EnGenius Quick Start
- Web Configuration
- Installation Setup Wizard
- Basic Network Settings
- 6.1 System Setup
- 6.2 Configuring WAN Settings
- 6.3 Wireless 2.4G LAN Setup
- 6.4 Wireless LAN 5G Setup
- 6.5 Firewall Setup
- 6.6 Virtual Private Network Setup
- 6.7 Advanced Network Settings
- 6.7.1 NAT Setup
- 6.7.2 Port Mapping Setup
- 6.7.3 Port Forwarding Setup
- 6.7.4 Port Triggering Setup
- 6.7.5 Application Layer Gateway Setup
- 6.7.6 Universal Plug and Play Setup
- 6.7.7 Internet Group Multicast Protocol Setup
- 6.7.8 Quality of Service Setup
- 6.7.9 Routing Setup
- 6.7.10 Wake on LAN Setup
- 6.7.11 USB Port Setup
- 6.8 Tools Setup
- USB Services
- Appendix A
- Appendix B
- Appendix C
- Appendix D
BASIC NETWORK SETTINGS CONFIGURING ADVANCED SETTINGS
ESR600H/ESR750H 6-56 USER GUIDE
6.5.2 Configuring Advanced Settings
The router supports VPN pass-through which allows virtual private networking (VPN) packets to pass through the firewall.
VPN Pass-through Click Select to allow VPN packets
to pass through the firewall.
VPN L2TP Pass-through Click Select to allow an
L2TP connection method over a VPN.
VPN PPTP Pass-through Click Select to allow a
PPTP connection method over a VPN.
VPN IPSec Pass-through Click Select to allow an
IPSec connection method over a VPN.
Click Apply to save the settings or Cancel to discard
changes.
Note:
VPN L2TP Pass-through, VPN PPTP Pass-through, and VPN IPSec Pass-through are enabled by factory
default.