User's Manual
Table Of Contents
- ESR600H/ESR750H Dual Concurrent Wireless Media Router
- Table of Contents
- Conventions
- Copyright
- Product Overview
- Installation
- EnGenius Quick Start
- Web Configuration
- Installation Setup Wizard
- Basic Network Settings
- 6.1 System Setup
- 6.2 Configuring WAN Settings
- 6.3 Wireless 2.4G LAN Setup
- 6.4 Wireless LAN 5G Setup
- 6.5 Firewall Setup
- 6.6 Virtual Private Network Setup
- 6.7 Advanced Network Settings
- 6.7.1 NAT Setup
- 6.7.2 Port Mapping Setup
- 6.7.3 Port Forwarding Setup
- 6.7.4 Port Triggering Setup
- 6.7.5 Application Layer Gateway Setup
- 6.7.6 Universal Plug and Play Setup
- 6.7.7 Internet Group Multicast Protocol Setup
- 6.7.8 Quality of Service Setup
- 6.7.9 Routing Setup
- 6.7.10 Wake on LAN Setup
- 6.7.11 USB Port Setup
- 6.8 Tools Setup
- USB Services
- Appendix A
- Appendix B
- Appendix C
- Appendix D

BASIC NETWORK SETTINGS > CONFIGURING SECURITY
ESR600H/ESR750H 6-50 USER GUIDE
Encryption: WPA RADIUS
Use a RADIUS server to authenticate wireless stations and provide a session key to encrypt data during communications.
WPA Type Select the type of Wireless Protected Access
(WPA).
WPA Temporal Key Integrity Protocol (TKIP) Gen-
erates a 128-bit key for each packet.
WPA2 Advanced Encryption Standard (AES) Pro-
tects unauthorized access by verifying network users
(encryption is stronger than TKIP).
WPA2 Mixed Mixed mode allows device to try WPA2
first, and if that fails selects WPA type.
RADIUS Server IP Address: Enter the IP address of the
server.
RADIUS Server Port: Enter the port number of the
server.
RADIUS Server Password: Enter the password of the
server.
Click Apply to save the settings or Cancel to discard
changes.