User's Manual

[ pg. 93]
Bandwidth Allocation
You can set the bandwidth allocation type (download and/or upload). You must provide the IP and Port ranges and select the type of protocol,
policy, and rate (bps).
•
Type:
select Download or Upload which you want to reserve or
limit the bandwidth
• Local IP Range: Enter the local IP range you wish to specify the
bandwidth allocation.
• Protocol: Select the protocol you wish to reserve or limit the
bandwidth
• Port Range: Enter the port range you wish to reserve or limit the
bandwidth.
• Policy: Select either the Minimum or Maximum bandwidth you
wish to specify
• Rate (bps): Select the desired bandwidth you would like to
reserve or limit.
When the configuration is complete, click Add and your setting will
be listed on the Current QoS Table.
Disable QoS if you do not want to prioritize any data or protocol.
Click Apply to save your settings.