User's Manual

[ pg. 9]
Back Panel Components Description
LAN Ports (1 – 4) Use an Ethernet cable to connect each port to a computer on your Local Area Network (LAN).
WAN /Internet Port Use an Ethernet cable to connect this port to a cable or DSL modem.
DC-Jack (POWER) Connect the power adapter to this connector.
Reset Button Press 0 to 5 seconds to reboot the router.
Press longer than 10 seconds to reset the router to the factory default settings.
Antenna Connector Interface for the antennas.
1.3. Wall Mounting
Mounting the ESR350H to a wall will allow the wireless range to be optimized. To mount the device in the wall, measure the distance of the
mounting holes of the ESR350H and drill the appropriate holes on the wall location. Once the nails are secure, firmly lock the mounts onto the
ESR350H.