User's Manual

[ pg. 81]
L2TP over IPSec profile setting
General
• Name: Enter a name for your VPN policy.
• Connection Type:
Supports PPTP, L2TP, IPSec and L2TP over IPSec
methods to establish VPN connection.
• Shared Key: Enter the Shared Key in box.
• Confirm: Enter your Shared Key again for verification.
L2TP
• Authentication: There are three authentication algorithms. Please select
CHAP, PAP, or MSCHAP_V2.
• Available Users: The users who you created in the User Setting to
connect to L2TP server will be displayed. Select the users in the list who
you wish to include in the VPN tunnel, and click the forward arrow to then
add them to the Member Box. Click the backward arrow if you want to
remove users from the Member box.
Network
• Server IP: Enter an IP address which is different from your router’s LAN IP
address.
• Remote IP Range: Enter an IP range under the same subnet of the above
Server IP.
Click Apply to save the L2TP over IPSec VPN profile setting.