User's Manual

[ pg. 8]
1.2. Product Layout
Front Panel
Components
Description
WPS LED This LED goes BLINK when the WPS feature is being triggered.
Power LED This LED goes ON when the power is being supplied to the router.
WLAN LED This LED goes ON when the RF (wireless LAN) feature is enabled.
WAN LED This LED goes ON when an Ethernet cable is connected to the router’s WAN port.
LAN (1 – 4 ) LEDs These LEDs go ON when an Ethernet cable is connected to the corresponding router LAN port.
WPS Button Click to activate the router’s Wi-Fi Protected Setup (WPS) feature.