User's Manual

[ pg. 74]
L2TP Settings
• User Name: Enter the user name used to connect to L2TP server
•
Password:
Enter the password used to connect to L2TP server
VPN Server IP Setting
• Server IP:
Enter an IP address which is different from your router’s LAN IP
address. (example: the default LAN IP of ESR350H is 192.168.0.1. You could
create a Server IP address as 10.0.174.45)
• Remote IP Range: Enter an IP range under the same subnet as the above
Server IP. (example: if your Server IP address is 10.0.174.45, you could create
the remote IP Range as 10.0.174.66 – 100. The remote IP range should not
include Server IP address to avoid duplicate IP Addresses within the same
network.)
Click Next.
The L2TP VPN profile should be completed successfully. Click Apply to save the
L2TP VPN Profile setting. To connect to the VPN tunnel, now you can use your
native Windows VPN client to connect the L2TP tunnel.