User's Manual
Table Of Contents
- Conventions
- Table of Contents
- Basic Network Settings
- 4.1 System Status
- 4.2 System Setup
- 4.3 Router Setup
- 4.4 Configuring Wireless LAN
- 4.5 Management Setup
- 4.5.1 Configuring Administrator Account
- 4.5.2 Configuring Management VLAN
- 4.5.3 Configuring SNMP
- 4.5.4 Configuring Backup/Restore Settings
- 4.5.5 Configuring Auto Reboot Settings
- 4.5.6 Configuring Firmware Upgrade
- 4.5.7 Configuring System Time
- 4.5.8 Configuring Wi-Fi Schedule
- 4.5.9 Configuring Command Line Interface
- 4.5.10 Configuring Logging
- 4.5.11 Configuring Diagnostics
- 4.5.12 Viewing Device Discovery
- 4.5.13 Configure Denial of Service Protection
- 4.5.14 Logging Out
- Appendix
TECHNICAL SPECIFICATION
1-4
Technical Specification
Wireless Specification
IEEE802.11a/n, 2T2R, 300Mbps
Hardware Specification
Physical Interface: 2 x 10/100Mbps LAN Ports, 1 x Reset
Button
Power Supply: Passive PoE, 24V/0.6A Power Adapter
Dimension: 190(D) x 38mm(H)
Operation Temperature: -20°C ~ 60°C
Embedded high gain directional antenna
Software Specification
Operation Mode: Client Bridge, Access Point, Client
Router, WDS AP, WDS Bridge, WDS Station
Multiple SSID, Preferred SSID
PPPoE, PPTP, L2TP Pass-through
WMM, Traffic Shaping
CLI Interface, SNMP v1/v2c/v3
Recovery Page
Port Forwarding/DMZ
Narrow Bandwidth










