User's Manual
Table Of Contents
- Table of Contents
- Product Overview
- Installation
- Web Configuration
- Basic Network Settings
- 4.1 System Status
- 4.2 System Setup
- 4.3 Router Setup
- 4.4 Configuring Wireless LAN
- 4.5 Management Setup
- 4.5.1 Configuring Administrator Account
- 4.5.2 Configuring Management VLAN
- 4.5.3 Configuring SNMP
- 4.5.4 Configuring Backup/Restore Settings
- 4.5.5 Configuring Auto Reboot Settings
- 4.5.6 Configuring Firmware Upgrade
- 4.5.7 Configuring System Time
- 4.5.8 Configuring Wi-Fi Schedule
- 4.5.9 Configuring Command Line Interface
- 4.5.10 Configuring Logging
- 4.5.11 Configuring Diagnostics
- 4.5.12 Viewing Device Discovery
- 4.5.13 Configure Denial of Service Protection
- 4.5.14 Logging Out
- Appendix A
- Appendix B
- Appendix C
BASIC NETWORK SETTINGS CONFIGURING BACKUP/RESTORE SETTINGS
4-44
4.5.4 Configuring Backup/Restore Settings
Click the Backup/Restore Setting link under the Management menu to save the EnStation2’s current settings in a file on your local
disk or load settings onto the device from a local disk. This feature is particularly convenient administrators who have several
EnStation2 devices that need to be configured with the same settings.
This page also lets you return the EnStation2 to its factory default settings. If you perform this procedure, any changes made to the
EnStation2 default settings will be lost.
Save A Copy of Current Settings Click Backup to save the current configured settings.
Restore Saved Settings from A File To restore settings that have been previously backed up, click Browse, select the file, and
click Restore.
Revert to Factory Default Settings Click Factory Default to restore the EnStation2 to its factory default settings.