User's Manual

61
SNMP Settings
ThispageallowsyoutoassigntheContactDetails,Location,
CommunityName, andTrapSettingsfora SimpleNetwork
Management Protocol (SNMP). SNMP is a networking
management protocol used to monitor network attached
devices.SNMPallowsmessages(calledprotocoldataunits)
tobesenttovariouspartsofthenetwork. Uponreceiving
these messages, SNMP compatible devices (called agents)
returns the data stored in their Management Information
Bases.
SNMP Enable/Disable
:EnablesordisablestheSNMP
feature.
Contact:
Speciesthecontactdetailsofthedevice.
Location: Speciesthelocationofthedevice.
Community Name (Read Only): Speciesthepassword
for the SNMP community for read only access.
Community Name (Read/Write):
Speciesthepassword
for the SNMP community with read/write access.
Trap Destination Address:
SpeciestheIPaddressofthe
computer that will receive the SNMP traps.
Trap Destination Community Name:
Speciesthe
password for the SNMP trap community.
SNMPv3: Enables or disables the SNMPv3 feature.
User Name:
SpeciestheusernameforSNMPv3.
Auth Protocol:Selectstheauthenticationprotocoltype:
MDS or SHA.
Auth Key:
Speciestheauthenticationkey.
Priv Protocol:Selectstheprivacyprotocoltype:DES.
Priv Key: Speciestheprivacykeyforprivacy.
Advanced Settings