User's Manual

49
*Default conguration: Default setting of channel
selection is “All” to perform auto channel on the exist
channel list.
*None
:Click“None”todisablethesettingonthisradio.
This radio is disabled.
*Group Conguration
:Click specicgroupsofchannels
forperformingautochannelfunction.Forexample,users
canclickU-NII-1andU-NII-3toperformautochannelon
these bands; the mechanism of this AP will select the
relatively optimal channel to peform wireless service.
Data Rate: Select a data rate from the drop-down list. The
data rate affects throughput of data in the AP. Select the
best balance for you and your network but note that the
lower the data rate, the lower the throughput, though
transmission distance is also lowered.
RTS/CTS Threshold:
Speciesthethresholdpackagesize
for RTC/CTS. A small number causes RTS/CTS packets to be
sent more often and consumes more bandwidth.
Client Limits: Limits the total number of clients on this radio.
Oncesettingtheceilingofclientnumbers,themaximum
assocaited client devices will be restricted at this number.
Aggregation: Integrate multiple data packets into one
packet to deliver to client devices. This option reduces the
numberofpackets,butalsoincreasespacketsizes.
AP Detection: AP Detection can select the best channel to
use by scanning nearby areas for Access Points.
Distance:
 Species the distance between Access Points
and client devices. The proper setting for this parameter
may assist Access Points to avoid the improper operation
whentransmittingdataunderaledapplication.
Save: Click SavetoconrmthechangesorCancel to cancel
and return to previous settings.