User's Manual
Table Of Contents
- Table of Contents
- Product Overview
- Installation
- Web Configuration
- Basic Network Settings
- 4.1 System Status
- 4.2 System Setup
- 4.3 Router Setup
- 4.4 Configuring Wireless LAN
- 4.5 Management Setup
- 4.5.1 Configuring Administrator Account
- 4.5.2 Configuring Management VLAN
- 4.5.3 Configuring SNMP
- 4.5.4 Configuring Backup/Restore Settings
- 4.5.5 Configuring Auto Reboot Settings
- 4.5.6 Configuring Firmware Upgrade
- 4.5.7 Configuring System Time
- 4.5.8 Configuring Wi-Fi Schedule
- 4.5.9 Configuring Command Line Interface
- 4.5.10 Configuring Logging
- 4.5.11 Configuring Diagnostics
- 4.5.12 Viewing Device Discovery
- 4.5.13 Configure Denial of Service Protection
- 4.5.14 Logging Out
- Appendix A
- Appendix B
- Appendix C
BASIC NETWORK SETTINGS CONFIGURING AUTO REBOOT SETTINGS
4-44
4.5.5 Configuring Auto Reboot Settings
Click the Auto Reboot Settings link under the Management menu to enable or disable the Auto Reboot function. This feature is par-
ticularly convenient to administrators for the scheduling of auto rebooting on the device.
This page also allows you to set the frequency of this function.
Auto Reboot Setting Select Enable from the drop-down menu to setup this function.
Frequency of Auto Reboot Select the frequency interval using the drop-down menus.
Save/Apply Click Save/Apply to set the new configuration.
Cancel Click Cancel to delete the settings.