User's Manual

Usingthe provided mounting parts, the ENH900EXT can

be attached to a wall or a pole.

To attach the ENH900EXT to a wall using wall

mounting kit.

1. Mark the four locations of the mounting holes on the

atmountingsurface.

2. Drill a 8mm diameter and 37mm depth hole in the

markings and hammer the bolts into the openings.

3. Place the at washers on four screws and drive the

screws to attach the mounting base to the back of the

Access Point.

4. Tightentheat washersandhex capstothe boltsfor

securing the mounting base to the mounting surface.

Mounting the ENH900EXT