User's Manual

BASIC NETWORK SETTINGS CONFIGURING WDS LINK SETTINGS
4-40
4.4.4 Configuring WDS Link Settings
Using WDS Link Settings, you can create a wireless backbone link between multiple access points that are part of the same wireless
network. This allows a wireless network to be expanded using multiple Access Points without the need for a wired backbone to link
them, as is traditionally required.
Security Select the type of WDS
security: None, WEP, or AES.
WEP Key Enter the WEP key.
AES Passphrase Enter the AES
passphrase.
MAC Address Enter the MAC address
of the Access Point to which you want to
extend wireless connectivity.
Mode Select Disable or Enable to
disable or enable WDS.
Click Accept to confirm the changes or
Cancel to cancel and return previous
settings.
Note:
The Access Point to which you want to extend wireless connectivity must enter the ENH202’s MAC address into its configuration. For
more information, refer to the documentation for the Access Point. Not all Access Point supports this feature.