User's Manual

~23~
Making a Telephone Call
1. Press TALK, wait for dial tone, and then enter phone number.
2. Alternatively, you can enter phone number first then press TALK key.
When using this method, you can use the CLEAR (Left) and DELETE
(Right) soft keys to edit the number entered. “Delete” erases the last
digit entered. “Clear” erases the entire line but remains in the dialing
mode.
3. Speed dial by access the entries in the phone book
a. Press ¿orÀ scrolling key to enter the phone
book
b. Press TALK to dial out the number
Main menu Sub-menu
1.Ke
y
Guard
2.PhoneBook
1.Dialed
2.Received
3.Missed
1.Ring Volume
2.Ring Tone
3.Key Volume
4 Key Tone
1.Dial Prefix
2.Group Select
3.Language
4.Clear
5.Custom Name
6.Contrast
7.Backlight
8.Call Barring
9.Name Tag
0.PBX Options
6.Re
g
istration
7.Text Messa
g
e
5.Settin
g
s
4.Sound
3.Call Lo
g
s
8.Call Mana
g
e
r
1.Dial Mode
2.Flash Time
3.Xfter PBX
4.Assign Next
9.S
y
stem
 11
EnGenius
8884328668
ADD OPTION
~24~
4. To abort dialing, press END key.
Notes:
1. After a link established, the Base ID will appear on the
upper-right corner. If no Base ID shown up, it applied that
you are approaching the boundary of the coverage.
2. If the line is occupied, the LCD shows “No Line Available”
and handset returns to standby mode.
3. If a link cannot be established, the LCD will show “No Base”
after a 12-second time out.
4. A call duration timer will start displaying the length of the
call after link is established.
Making an 2-Way/ Intercom Call
The EnGenius Industrial Cordless Phone System offers private, Intercom/ 2-
way radio calls independence of base station. Intercom/ 2-way
communication can be placed from or to base stations and handsets.
A. Handset to Handset Calls
1. Press Intercom key followed by a two-digit handset
ID or Group ID.
2.
Press END key to end the call.
Notes:
1. Intercom calls can be made regardless if the Base Station is
present.
2. If a Group ID is entered, the first handset (belonging to that
group) that answers will establish a link with the caller. See
Handset Group Subscription.
3. If a link cannot be established, the LCD shows “No
Connection” after a 12-second time out.
B. Intercom/2-Way from Base to Handset
1. Press Intercom key on the base station to intercom
all registered handsets. The first handset to answer
will establish a voice link with the base.
2.
The INTERCOM LED will flash until a handset
responds.
3. The base unit will page for 15 seconds, then terminate the page if no
 11
Please enter
Ext. #: 12
 11
Intercom from
Base 1
SLIENT