User's Manual

ManualsBrandsEnGenius Technologies ManualsCordless TelephoneEnGenius Technologies EnGenius Technologies Cordless Telephone 3616A-SN1302

~2~

Table of Contents

Safety Instructions........................................................................................4

General Safety Instructions......................................................................4

Product Safety Instructions ......................................................................4

Battery Safety Instructions .......................................................................6

Regulatory Information .................................................................................7

Equipment Checklist..................................................................................... 9

Handset Illustration.....................................................................................10

Basic Handset Features.........................................................................11

Additional Handset Features..................................................................12

Administrator Features...........................................................................15

Base Illustration .......................................................................................... 16

Basic Base Station Features..................................................................17

Charger Illustration .....................................................................................18

Charger Features .......................................................................................19

Base Station Installation.........................................................................20

Handset and Charger Installation .......................................................... 21

Basic Operations ........................................................................................22

Operation Modes.................................................................................... 22

A. Base Operation Modes..................................................................22

B. Handset Operation Modes ............................................................ 22

Making a Telephone Call ....................................................................... 23

Making an 2-Way/ Intercom Call............................................................24

A. Handset to Handset Calls.............................................................. 24

B. Intercom/2-Way from Base to Handset .........................................24

C. Intercom/2-Way from Handset to Base......................................... 25

Making a Broadcast ...............................................................................25

A. Handset to Handset Calls.............................................................. 25

B. Broadcasting from Base to Handset .............................................26

C. Broadcasting from Handset to Base .............................................26

Redial .....................................................................................................26

Receiving a Telephone Call ...................................................................27

Receiving an Intercom Call ....................................................................27

Ending a Call.......................................................................................... 27

Adjusting Receiver (Earpiece) Voice Volume ........................................28

Placing a Call On Hold........................................................................... 28

Mute .......................................................................................................28

Do Not Disturb (Silent Ring)...................................................................29

Key Guard ..............................................................................................29

To View Missed Call(s) .......................................................................... 29

Battery Recharge and Replacement...................................................... 29

Summary of content (24 pages)

PAGE 1
Table of Contents Safety Instructions ........................................................................................ 4 General Safety Instructions...................................................................... 4 Product Safety Instructions ...................................................................... 4 Battery Safety Instructions ....................................................................... 6 Regulatory Information .........................................................
PAGE 2
Advanced Operations................................................................................. 31 Handset Registration.............................................................................. 31 Handset Group Subscription.................................................................. 32 Registration of Additional Base.............................................................. 32 Call Transfer...........................................................................................
PAGE 3
. Changes or modifications to this product not expressively approved by the manufacturer will void the warranty and the FCC authorization to operate the equipment. Use only manufacturer provided accessories. 4. Do not use the telephone near water. Never spill liquid of any kind on this product. 14. Do not place the product where persons can step, trip, or fall on it. 15. Do not place conductive objects over or near the antenna. 16.
PAGE 4
Regulatory Information Notes: In the event of any inconsistency between the English and French versions hereof, the English version shall prevail. DuraFon 1X FCC ID: NI3-SN1302 IC: 3616A-SN1302 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. 1.
PAGE 5
Equipment Checklist 1. Handset Illustration In a Base + Handset package, please find the following components: a. Base Station x 1 b. Base Antenna x 1 c. Base AC/DC Adaptor x 1 d. Handset x 1 e. Low Profile Handset Antenna x 1 f. Optimal Performance Handset Antenna x 1 g. 1700mA Li-ion Battery Pack x 1 h. Charger x 1 i. Charger AC/DC Adaptor x 1 j. Telephone Cord x 1 k. Belt Clip x 1 h User’s Manual, Quick Guide, and Warranty Card Antenna Belt Clip Holder Receiver Left/Right soft keys 4-line LCD 2.
PAGE 6
Handset Features b. Sends a Flash signal to phone line to retrieve a dial tone after the call ends, or to perform the call waiting feature provided by local phone companies during a call. Basic Handset Features 1. 4-line LCD (Liquid Crystal Display) a. The LCD display has LED (Light Emitting Diode) for backlighting. b. The 1st line of LCD consists of icons. c.
PAGE 7
a. Five-level ringer volume selections (high/ low/ vibrate/ vibrate-thenring/ off) b. Four ringer type selections 3. Caller ID a. Displays incoming call phone number and name on the LCD (needs Caller ID service from local telephone company) 4. Call waiting with caller ID a. Displays 2nd incoming call information on the same phone line when 1st call is in progress (needs Call Waiting with Caller ID service from local telephone company) 5. Name tagging with caller ID a.
PAGE 8
a. Allow user to pre-program the most frequently used PBX feature along with its feature code into DuraFon which is adjunct to the PBX system b. Up to 9 entries can be saved c. Once the feature and feature codes being programmed, you can quick perform those functions during the call by pressing OPTION soft key. Base Illustration Reset Button Line In Register Button Audio In RJ11 for Answering machine DC In Administrator Features Handsets 11 and 12 are designated administrators.
PAGE 9
Base Features Charger Illustration Basic Base Station Features DC In 1. Antenna a. The antenna port has a reverse thread connector; to remove antenna or cable, turn clockwise; to install, turn counterclockwise. Improper installation may damage the connector b. When using an outdoor antenna, locate the antenna (not the base station itself) as high as possible for a clear transmission path. Spare Battery Charging Slot 2. LED a. Power: it indicates base station has power. b.
PAGE 10
Getting Started Charger Features Base Station Installation 1. DC In Connects to Charger AC Adaptor. 2. Handset Charging Slot a. Charge handset battery when handset is placed in cradle. b. Refer to the handset LCD for charging status (1) Charging: LCD screen showed “Charging” (2) Fully Charged: battery status bar stands still and the LCD screen would display “Fully Charged” (3) Charge Fail: Should there be any error occurred during charging mode, the LCD screen would display “Charge Fail” 3.
PAGE 11
Basic Operations Handset and Charger Installation Operation Modes 1. Plug the transformer end of the Charger AC/DC adaptor into a standard AC electric power outlet, plug the other end into the “DC In” jack on the back of the Charger. Both the base station and handset have levels of operation at which time only certain procedures of functions can be performed. 2. Install battery pack onto the handset. A. Base Operation Modes 1. IDLE mode- this is the default mode.
PAGE 12
4. To abort dialing, press END key. Main menu Sub-menu Notes: 1.KeyGuard 1. 2.PhoneBook 1.Dialed 2.Received 3.Missed 3.Call Logs 2. 1.Ring Volume 2.Ring Tone 3.Key Volume 4 Key Tone 4.Sound 3. 4. 1.Dial Prefix 2.Group Select 3.Language 4.Clear 5.Custom Name 6.Contrast 7.Backlight 8.Call Barring 9.Name Tag 0.PBX Options 5.Settings 6.Registration 7.Text Message 8.Call Manager 9.
PAGE 13
handset responds. 4. Before a handset answers, the INTERCOM can be cancelled from the base by pressing INTERCOM again. However, once a handset answers, only the answering handset can end the call. C. Intercom/2-Way from Handset to Base 1. Press Intercom key followed by a two-digit base ID [Note: Base 1 ID as 10, Base 2 ID as 20, Base 3 ID as 30, and Base 4 ID as 40] 11 Please enter Ext. #: 10 2. The base will ring once, then automatically connect the intercom call from a handset. Making a Broadcast A.
PAGE 14
[Note] Intercom numbers (Handset ID) are not stored in the last 10 numbers dialed log. To end a telephone or intercom call, press END key or place handset into charger cradle. Receiving a Telephone Call Adjusting Receiver (Earpiece) Voice Volume 1. When an incoming call arrives, the ringer will ring or vibrate unless the ringer has been turned off. 1. Voice volume can only be adjusted during a call. 2.
PAGE 15
hold. effective only for the current call. Do Not Disturb (Silent Ring) 1. Enter the key sequence MENU – Sounds – Ring Volume, then select “Off”. Press SAVE to confirm your choice. This will turn off the ringer until it is turn on again from the menu. 2. For temporary silencing the ringer when an incoming call arrives, press SILENT (Left) soft key. 11 Sounds: ÇÈ 1. Ring Volume 2. Ring Tone 3. Battery talk time and standby time vary depending on the talk/standby pattern and the operating distance.
PAGE 16
Advanced Operations Handset Registration 2. 1. If your handset(s) is purchased as part of a system, it has been preregistered with the base station at the factory. 2. If Handset ID as “00,” that means it is a new handset or the ID has been erased. You need to register the handset with the base station. 3. Registration: a. Press MENU-6 to enter the registration mode b. Press and hold the base’s Registration (REG) button for 2 seconds until 4 LEDs light up. c.
PAGE 17
3rd, and 4th base unit. 3. Registration: a. Press MENU-6 from HS 11 to enter the registration mode b. Press and hold the Registration (REG) button on that additional base unit, which you want to add into the system) for 2 seconds until 4 LEDs light up. c. Press handset key “3”, then enter the base ID i.e. 20 for 2nd base, 30 for 3rd base, or 40 for 4th base. this completes the registration process. (1) Speak to the destination handset. (2) Press XFER soft key or the END to end announcement.
PAGE 18
a. Press Menu-9 and enter the two-digit base ID to enter the System mode. b. Press 1 to enter Tone selection c. You can adjust the dial mode between Tone and Pulse. The default setting is Tone. d. The default setting is Tone. 2. Flash Time a. Press Menu-9 and enter the two-digit base ID to enter the System mode. b. Press 2 to enter Flash selection c. You can adjust the flash time from 100ms to 900 ms (9 levels to choose from.) For example, press “2” if the desired flash time is 200ms.
PAGE 19
Notes: 1. When enter a phone number, the cursor automatically advances to the next digit field. Use ¿or À scrolling key to move the cursor backward or forward to insert or delete. 2. When entering a name, the cursor automatically advances to the next character field if you press a different key for the next character. If you need to enter consecutive characters from the same key, you can wait for the cursor to advance or use ¿or À scrolling key to move the cursor backward or forward manually.
PAGE 20
confirm your selection. 3. To edit the Call barring code a. Once turn on the call barring feature, you can key in the “call barring” code. (1) Up to 5 digit can be edit to be call barring code. For example, if you want to block all call dialing to Manhanttan, NY area, you can enter 1212 as the call barring code. (2) If you base station is adjuct to a PBX system, please also include that specific number to retrieve the PSTN tone. b. Press OPTION to erase or edit the call barring codes. c.
PAGE 21
2. Up to 9 most frequently used PBX feature codes can be pre-programmed. 3. Name and enter PBX feature codes: a. Press Menu (Right) soft key while the handset is in standby. b. Press “5” following by “0” to enter “PBX Options” menu. c. Press ADD soft key to edit a PBX feature to be memorized. d. Key in the name of the PBX features just like editing a phonebook entry i.e. PBX Transfer. Press SAVE to confirm your entries. e. Key in the feature code of the correspondence PBX feature i.e. Flash*70.
PAGE 22
(2) Save: press “2” to edit and save or save without editing into the phonebook. (3) View Number: press “3” to view the complete number if the phone number is longer than 14 digits. b. Press “2” to view the last 10 phone numbers received, starting from the most recent one. Use ¿orÀ to scroll through the list. Press OPTION for options. (1) Erase: press “1” and confirm to erase the current record. (2) Save: press “2” to edit and save or save without editing into the phonebook.
PAGE 23
(2) When finished; press SAVE to save change. g. Press “7” to change the LCD backlight: Technical Specifications (1) Use ¿orÀ to scroll through options: On, Off, and 8 Seconds. Default = 8 seconds, meaning that the backlight will turn off the backlight after 8 seconds of inactivity. (2) When finished; press SAVE to save change.
PAGE 24
~47~