User's Manual

33
This page displays the current status of the Wireless
settings of the EAP900H.
Access Point / WDS AP mode:
Wireless mode: supports802.11b/g/nmixedmodein2.4G
and802.11a/nmixedmodein5G.
Channel HT Mode: The default channel bandwidth is 20 /
40MHz. The larger the channel, the better the transmission
quality and speed.
Extension Channel: Select upper or lower channel. Your
selection may affect the Auto channel function.
Channel / Frequency: Select the channel and frequency
appropriate for your country’s regulation.
Auto: Check this option to enable auto-channel selection.
AP Detection: AP Detection can select the best channel to
use by scanning nearby areas for Access Points.
Current Prole: Congure up to eight differentSSIDs(4
in WDS AP mode). If many client devices will be accessing
the network, you can arrange the devices into SSID groups.
Click Edittoconguretheproleandcheckwhetheryou
want to enable extra SSID.
Accept / Cancel: Click Accept to conrm the changes or
Cancel to cancel and return previous settings.
Wireless Network