User's Manual

WDS Bridge Mode

InWDSBridgeMode,theEAP900HcanwirelesslyconnectdifferentLANsbyconguringtheMACaddressandsecurity

settings of each EAP900H device. Use this mode when two wired LANs located a small distance apart want to communicate

with each other. The best solution is to use the EAP900H to wirelessly connect two wired LANs, as shown in the following

gure.

WDS Bridge Mode can establish four WDS links, creating a star-like network.

Note: WDS Bridge Mode does not act as an Access Point. Access Points linked by WDS are using the same frequency

channel. More Access Points connected together may lower throughput. This conguration can be susceptible to

generate endless network loops in your network, so it is recommended to enable the Spanning Tree function to

prevent this from happening.

EAP 900H

WDS Bridge

EAP 900H

WDS Bridge

EAP 900H

WDS Bridge

Client

Computer

Client

Computer

Client

Computer