User's Manual

To attach the EAP900H to a ceiling using the

provided T-rail connectors:

1. Attach the T-rail connectors to the bottom cover of the

EAP900H using the provided short screws.

Note: Two sizes of T-rail connectors are included in the

mounting hardware kit: 15/16in (2.38cm) and 9/16in

(1.43cm). If extra space is required to accommodate drop

ceiling tiles, use the provided spacers and long screws.

2. Line up the connected T-rail connectors with an

appropriately sized rail and press the unit onto the rail

until it snaps into place.

Note: To protect your EAP900H, use the Kensington

security slot to attach a cable lock (cable lock is not

included).

P2.6*10 Screw

Clip

T-Rail

Clip

Clips

Spacer

P2.6*25 Screw