User's Manual

VLAN Setup

Below is a sample network diagram for VLAN.

Please note that in order for the settings to save on this

unit you need to click Save & Apply under the

Save/Reload option under Status.

Step 1. Setup Operation mode to Access Point.

Step 2. Setup the wireless settings. Click Edit on the SSID

you want to configure. Note The Isolation checkbox tells

the unit that you want the SSID to be mapped to a VID

specified in the VID field. If the Isolation box is not

checked the SSID will not be tied to the VLAN that is not

tagged off the trunk port. The Enable checkbox is

checked if you want the AP to have an SSID accessible via

the wireless side of the AP.

Step 3. Configure the AP with the SSID you want, and the

type of encryption you desire.