User's Manual

Radius Accounting: Enable or disable accounting feature.

Radius Accounting Server: Enter the IP address of the Radius

accounting server.

Radius Accounting Port: Enter the port number used for

connections to the Radius accounting server.

Radius Accounting Secret: Enter the secret required to

connect to the Radius accounting server.

Interim Accounting Interval: Specify how often, in seconds,

the accounting data sends.

Note: 802.11n does not allow WEP/WPA-PSK

TKIP/WPA2-PSK TKIP security mode. The connection

mode will automatically change from 802.11n to 802.11g.

7.3 Site Survey

Use this feature to scan for nearby access points.

Note: Only applicable in Repeater mode.

1. Click Site Survey.

2. Scanning for the nearby access points

3. The EAP350 will list the available access points after site

survey.