User's Manual

clients. If checked, the SSID will not appear in the site survey.

Station Separation: Click the appropriate radio button to

allow or prevent communication between client devices.

Wireless Security: See the Wireless Security section.

Save / Cancel: Click Save to accept the changes or Cancel to

cancel and return previous settings.

Repeater mode:

Wireless Mode: Wireless mode supports 802.11b/g/n mixed

mode.

SSID: The SSID is a unique named shared amongst all the

points of the wireless network. The SSID must be identical on

all points of the wireless network and cannot exceed 32

characters. You may specify an SSID or select one from the Site

Survey.

Site Survey: Click on Site Survey to search the existing Access

Points.

Preferred SSID: Specify the SSID for the repeater. It can be

different from Access Point’s SSID.

Preferred BSSID: Specify the BSSID (Access Point’s MAC

Address).

Wireless Security: The encryption is using. It must the same

as Access Point’s encryption.

Accept / Cancel: Click Accept to confirm the changes or

Cancel to cancel and return previous settings.

7.2 Wireless Security

The Wireless Security section lets you configure the

EAP350's security modes: WEP, WPA-PSK, WPA2-PSK,

WPA-PSK Mixed, WPA, WPA2, and WPA Mixed. We

strongly recommend using WPA2-PSK.

Note: Only in Access Point and WDS AP mode.

WEP Encryption: