User's Manual

32
Beacon Interval
The time interval that the device broadcasts a beacon. This beacon is used to synchronize all wireless
clients on the network.
DTIM Period
A Delivery Traffic Indication Message informs all wireless clients that the access point will be sending
Multi-casted data.
N Data Rate
You can limit the transfer rates between the device and wireless clients. Each Modulation
Coding Scheme
(MCS) refers to a specific transfer speed.
Channel Bandwidth
Set whether each channel uses 20 or 40Mhz.
To achieve 11n speeds, 40Mhz channels must be used.
Preamble Type
A preamble is a message that helps access points synchronize with the
client.
Long Preamble is standard based so increases compatibility.
Short Preamble is non-standard, so it decreases compatibility but increases performance.
Tx Power
Set the power output of the wireless signal.