User's Manual

30
You can create up to 4 separate wireless networks.
SSID#
Enter the name of your wireless ne
twork. You can use up to 32 characters.
Auto Channel
When enabled, the device will scan the wireless signals around your area and select the channel with
the least interference.
Channel
Manually select which channel the wireless signal will use.
Check C
hannel Time
When Auto Channel is Enabled, you can specify the period of the device will scan the wireless signals
around your area.
Wireless Distribution System (WDS)
Using WDS to connect Access Point wirelessly, and in doing so extend a wired
infrastructure to locations where cabling is not possible or inefficient to
implement.
Note that compatibility between different brands and models is not
guaranteed. It is recommended that the WDS network be created using the
same models for maximum compatibility.
Also note that all Access Points in the WDS network needs to use the same
Channel and Security settings.
To create a WDS network, please enter the MAC addresses of the Access
Points that you want included in the WDS. There can be a maximum of four
access points.