User's Manual

Overview

The Overviewsectioncontainsthefollowingoptions:

• DeviceStatus

• Connections

Thefollowingsectionsdescribetheseoptions:

Device Status

Clicking the Device Status link under the Overview menu

shows the status information about the current operating

mode.

•  The Device Status section shows general system

informationsuchasDeviceName,MACaddress,Current

Time,FirmwareVersion,andManagementVLANID

Note: VLAN ID is only applicable in Access Point or WDS

AP mode.

•  The LAN Information section under the Connections

link shows the Local Area Network settings such as the

LANIPAddress,Subnetmask, Gateway,DNSAddress,

DHCPClient,andSTPstatus.

•  TheCurrent 2.4 GHz/5 GHz Wireless Settings section

under the Basic link shows wireless information such

asOperatingMode,Frequency,andChannel.Sincethe

EAP1200Hsupportsmultiple-SSIDs,informationabout

each SSID and security settings are displayed.

Note: ProleSettingsisonlyapplicableinAccessPoint

or WDS AP mode.