Owner's Manual

6
AUTO SWITCHING FEATURE
When the refrigerator is plugged into both AC and DC power sources, your unit
will automatically switch to AC power when AC power is available. Both cords may
remain plugged in at the same time. The refrigerator will automatically switch back to
DC power when AC power is no longer available.
A.C. Operation
D.C. Operation
CAUTION
A special thermal fuse is located in the plug body of the DC Cord / Plug that is
provided with your refrigerator. If the fuse blows, replace the glass fuse with a new
10 Amp fuse.
TEMPERATURE SETTING
Temperature range – Achievable temperature from -18〜10℃, The setting
temperature is displayed when the LED starts blinking. The current temperature at
the centre of the fridge will be displayed once the LED lights up. When the “KNOB”
is turned, the setting temperature will continuously change the range of the
temperature. After pre-setting the temperature, the LED display will stop blinking
(after a few seconds), indicating the temperature has been set (locked).
MODE
COOL
off
1
2
3
4
5
0
SELECT
About temperature settings of dual zone
You can change the freezer temperature by adjusting the control knob. The desired
freezer temperature will be shown on the control display as you change the setting.
At ambient temperatures of around 30 ℃ the fridge compartment has been
preprogramed to remain between 0℃ to 5℃ . This cannot be changed.
＊
Refer to appendix for details