Specifications

ENFORCER
®
2009 Vehicle Catalog
12
Patent
pending
CA-1610-3FLQ*
CA-1615-06LQ*
CA-1510-3FLQ*

DC Jack to Plug,
6” wire,
with LED.

LED indicates
power and
polarity.

DC Jack, 3 ft.
wire with
LED.

LED indicates
power and
polarity.

DC Plug, 3 ft.
wire with
LED.

LED indicates
power and
polarity.
CA-161T-02SLQ*

DC Plug to Terminal Block, 2.5” wire,.

LED indicates power and polarity.

DC Jack to Terminal Block, 2.5” wire.

LED indicates power and polarity.
*U.S.A. and international patents pending.
ST-LA105-TTQ (0.5A)
ST-LA110-TTQ (1.0A)

Converts 12/24 VAC/VDC to a
regulated 5/12/24
VDC output (adjustable).

Input voltage: 12/24 VDC/VAC.

Output voltage: 5/12/24 VDC
(selectable & adjustable).

Small size for easy installation.

Input power LED indicator.

Multi-color LED indicates output voltage.

Terminal block connections for secured wiring.
ST-HB105-TTQ

Compensates for DC voltage
drops over
long cable runs.

Input voltage: 7-24 VDC

Output voltage:
12 or
24 VDC (adjustable).

Output current: 500mA @ 12/24
VDC.

Input power LED indicator.

Multi-color LED indicates output voltage.

Terminal block connection for secured wiring.
ST-BD01Q
The ENFORCER Low-Voltage Battery Cut-Off
prevents the deep discharge of a backup battery.
The ST-BD01Q ties directly into most 12 or 24 VDC
power supplies or alarm panels for easy plug-and-
play installation. A Master On/Off switch easily
connects or disconnects the battery and AC power
supply from the control panel.

Selectable input 12/24VDC.

Adjustable voltage cut-off and restore point.

Master On/Off switch.

Green AC LED
power indicator.

Dual-color DC LED indicator.

Includes battery leads
and double-sided
tape.
ST-BT01Q

Voltage testing via 4 LEDs.

Selectable 500mA or 1A
load.
ST-UV12-S1.0Q
Shown
ST-UV12-S0.5Q 0.5 Amp
ST-UV12-S1.0Q 1.0 Amp
ST-UV12-S2.0Q 2.0 Amp

Sideways plug for ease of
use on
power strips.

Universal 100-240 VAC input.

Regulated 12VDC output.

6 ft. cord, 2.1mm plug (positive center).

Low power consumption.
ST-UV12-S3.0Q
Shown
ST-UV12-S3.0Q 3.0 Amp
ST-UV12-S4.0Q 4.0 Amp

LED power indicator.

Universal 100-240VAC input.

Regulated 12VDC output.

6 ft. cord 2.1mm plug (positive center).

Includes AC power cord
(IEC320-C13).

Low power consumption.
The ENFORCER
ST-BT01Q is more
than just a battery
tester. Additional
features make it
the perfect tester
for your tool box.
Operating Voltages
Input Voltage Output Voltage
Adjustable
Voltage Range
7~12 VDC 12VDC 12.2~13.5 VDC
12~24
VDC 24VDC 23.0~25.2 VDC
Operating Voltages
Input Voltage Output Voltage
8~30 VDC/VAC 5VDC
15~30 VDC/VAC
12VDC
24~30 VDC/VAC 24VDC
CA-151T-02SLQ*
SECO-LARM’s Illuminated Power Connectors
make troubleshooting CCTV or other 12VDC or
24VAC equipment easy. A quick glance at the
built-in multi-colored LED prevents damage to
the equipment by warning of incorrect voltage
or polarity. Available as either a plug or a jack,
the Illuminated Power Connectors are perfect for
nearly every installation, including CCTV, access
control, or any other low voltage (5~30 VAC/VDC)
device.
Tests:
1. Voltage
2. Battery
Load
3. V
oltage Drop
4. Polarity
5. PTC
fuse
Low B y Cutof
a e Po er C nec o
Vo t g Co ver
n C Co t w t
Vo e oos
5 1 at e Te e
u t AC Ad
a top S c n w u p