Specifications

ENFORCER
®
2009 Vehicle Catalog
10
EVT-PB1Q

Gold-plated BNC connector.

Screwless terminal block for
easy installation.

Transmit range:
2,000 ft. B/W, 1,300 ft. color.
EVT-PBP-V1TQ

6-inch BNC pigtail connector.

Gold-plated BNC connector.

Screw terminals for
reliable installation.

Transmit range:
2,000 ft. B/W,
1,300 ft. color.
EVT-PB1-V1TSQ
EVT-PB1-V1TGQ

Built-in surge protection.

Gold-plated BNC connector.

Screw terminals for
reliable installation.

Transmit range:
2,000 ft. B/W,
1,300 ft. color.

Gold-plated BNC connector.

Built-in ground loop isolation.

Removable terminal block.

Built-in surge protection.

Transmits B/W signal up to 980 ft.

2000 ft. (610m) video range.

Built-in voltage booster.

Compensates DC voltage
drops over long cable runs.

Input voltage: 7~24 VDC.

Output voltage:
12 or 24 VDC jumper selectable ranges.
Vernier adjustment within each range.

Output current: 500mA @ 12/24 VDC.

Video, power and data over Cat5e/6.

Gold-plated BNC connector.

Built-in dual-color LED indicates power and polarity.

Built-in DC-plug power connector and data wire.
EVT-PB1-H05Q

2,000 ft. (610m) video range.

Built-in power converter
converts 24VAC to 12VDC (0.5A).

Video, power and data over Cat5e/6.

Gold-plated BNC connector.

Built-in dual-color LED indicates power and polarity.

Built-in DC-plug power connector and data wire.

Video, power, and
data over Cat5e/6.

Built-in ground loop
isolator to prevent
grounding interference.

Built-in dual-color LED
indicates power and polarity.
*VPD - Video, Power, and Data.
EVT-PB1-L05Q
EVT-PB1-31RGQ
EVT-PC4P-JTQ
4-Port Power Disbribution Card

Connects up to
4 CCTV cameras
(per PCI card) to
a central location
using low-cost
Cat5e/6 UTP cable.

Range: Up to 2,000 ft. (610m).

Simplifies and organizes PC-based DVRs.

Works with all SECO-LARM passive video baluns.

Feeds camera signals to nearly any standard DVR.

Video card is passive – no power required.

Optional power
distributor card.

Includes a 12VDC,
4A power adaptor.

Tri-Color LED
indicates polarity
and power present.

Removable terminal blocks for easy installation.
EVT-PC4-VT2Q
4-Port Video Balun Card
EVT-PC8-VTDQ
8-Port Video Balun Card

Connects up to 8 CCTV cameras (per PCI card) to a
central location using low-cost Cat5e/6 UTP cable.

Range: Up to 2,000 ft. (610m).

Simplies and organizes PC-based DVRs.

Works with all SECO-LARM passive video baluns.

Feeds camera signals to nearly any standard DVR.

Video card is passive -- no power required.
EVT-PC8P-JTQ
8-Port Power Disbribution Card

Includes a 12VDC, 6A power adaptor.

Tri-Color LED indicates polarity and power present.

Removable terminal blocks for easy installation.
EVT-PBM-V27Q
EVT-PBM-V17Q

Female gold-plated BNC, fits a
9
/
16
" x
5
/
8
" hole in a single-gang plate.

Transmit range: Up to 2,000 ft. (610m).

RJ-45 connector.

Male gold-plated BNC, fits a
9
/
16
" x
5
/
8
" hole in a single-gang plate.

Transmit range: Up to 2,000 ft. (610m).

RJ-45 connector.
SECO-LARM video baluns are the fast, easy,
and low-cost way to connect a CCTV camera
to a monitor, multiplexer, or video recorder
using low cost Cat5e/6 cable.
Two video baluns are normally used, one on
each end of a pair in the Cat5e/6 cable. A
Cat5e/6 cable has 4 pairs of wire inside, so 4
channels of video information can be carried
on a single Cat5e/6 cable.
All SECO-LARM passive video baluns transmit
the video signal of a single CCTV camera long
distances over low-cost Cat5e/6 (or better)
unshielded twisted pair (UTP) cable.

Transmits a monochrome
video signal up to 2,000 ft.
(610m) or color up to
1,300 ft. (400m).

Transmits video, power,
and data over Cat5e/6.

Built-in dual-color LED
indicates power and polarity.

Removable terminal blocks.
EVT-PB1-31RQ

Same as EVT-PB1-31RQ, but with RJ-45 connector
instead of terminal block.
EVT-PB1-318Q
PC B u H C ds o
P ve V eo l
S p P ve V eo
e lu w olt ge o e
ive B e C e te
D B n G o Loop t
C B H C rd P
V de B un
v V d o, o r D ( D n