SDS

SAFETY DATA SHEET
Enforcer Flea Spray for Carpets & Furniture XX
Version 1.0
Revision Date 06/08/2015
Print Date 06/12/2015
4 / 11
containment and cleaning up
acid binder, universal binder, sawdust).
Sweep up or vacuum up spillage and collect in suitable
container for disposal.
SECTION 7. HANDLING AND STORAGE
Advice on safe handling
:
Avoid exposure - obtain special instructions before use.
Avoid contact with skin and eyes.
For personal protection see section 8.
Smoking, eating and drinking should be prohibited in the
application area.
Do not breathe vapours or spray mist.
Take precautionary measures against static discharges.
Provide sufficient air exchange and/or exhaust in work rooms.
Dispose of rinse water in accordance with local and national
regulations.
Always replace cap after use.
Conditions for safe storage
:
BEWARE: Aerosol is pressurized. Keep away from direct sun
exposure and temperatures over 50 °C. Do not open by force
or throw into fire even after use. Do not spray on flames or
red-hot objects.
No smoking.
Containers which are opened must be carefully resealed and
kept upright to prevent leakage.
Observe label precautions.
Keep in a dry, cool and well-ventilated place.
Electrical installations / working materials must comply with
the technological safety standards.
Materials to avoid
:
Store and keep away from bases and alkalies.
Store and keep away from, oxidizing agents and acids.
SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Components with workplace control parameters
Components
CAS-No.
Value type
(Form of
exposure)
Control
parameters /
Permissible
concentration
Basis
butane
106-97-8
TWA
800 ppm
1,900 mg/m3
NIOSH REL
TWA
800 ppm
1,900 mg/m3
OSHA P0
Distillates (petroleum),
hydrotreated light
64742-47-8
TWA
500 ppm
2,000 mg/m3
OSHA Z-1
TWA
400 ppm
1,600 mg/m3
OSHA P0
propane
74-98-6
TWA
1,000 ppm
ACGIH
TWA
1,000 ppm
1,800 mg/m3
NIOSH REL
TWA
1,000 ppm
OSHA Z-1