User guide

GSM1308 Quad-Band
SA-G+ User Manual
GSM1308UG001 1 Version 1.02 – 10/29/08
1 Introduction
1.1 About the GSM/GPRS SA-G+
The GSM/GPRS SA-G+ is a compact, stand-alone wireless IP (GSM/GPRS)
modem. The GSM/GPRS SA-G+ is designed for computing devices operating
Windows XP and Windows 2000 or any serial-enabled platform. The SA-G+ can
be used as a stand-alone serial device with other vertical applications. Enfora’s
GSM/GPRS SA-G+ provides maximum versatility in a single affordable device
with 2 User-Definable Input/Outputs (I/O) and 1 User-Definable Output.
1.2 About this Manual
Contained in this manual are instructions on how to install and configure the
GSM/GPRS SA-G+ modem. Please follow the instructions herein closely to
avoid damaging the GSM/GPRS SA-G+.
The GSM/GPRS SA-G+ modem contains an Enfora Enabler-IIIG OEM module.
Detailed information pertaining to the specifications and operation of the module
will pertain, in part, to the GSM/GPRS SA-G+ platform.
The information can be accessed at the Enfora website (http://www.enfora.com)
under Support and Resources.
Refer to the following documentation for additional information, if required:
Manuals
GSM0308AT001 - Enfora IIIG Module AT Command Set Reference
GSM0308UG001 - Enfora GSM-GPRS Family API Reference
Application Notes
GSM0000AN002 - Enabler-G PPP Configuration for Windows 2000
GSM0000AN003 - Enabler-G Data Circuit Switched Call Configuration and Use
GSM0000AN004 - Enabler-G SMS Configuration and Use
GSM0000AN005 - Enabler-G Automated Network Connection Configuration and
Use
GSM0000AN006 - Enabler-G Module Status Query
GSM0000AN007 - Enabler-G Status Reporting
GSM0000AN008 - Enabler-G PPP Configuration for Windows XP
GSM0000AN009 - Dynamic IP Assignment Support
GSM0000AN011 - PAD Configuration and Use
GSM0000AN012 - Network Transparency Configuration for PAD
GSM0000AN013 - Enabler-G Sleep Mode Configuration and Use