Specifications
AT Command Set Reference
Ver. 1.00
GSM1308AT001 Page 50 Ver. 1.00 – 10/29/2008
2.1.3.8. AT+COLP Connected Line Identification
Presentation (continued)
Parameter Values
<n> (parameter sets/shows the result code
presentation status in the TA)
0 disable
1 enable
<m> (parameter shows the subscriber COLP
0 COLP not enabled
1 COLP enabled
2 Unknown (e.g. no network, etc.)
Reference GSM Ref. 07.07 Chapter 7.8
Standard Scope Optional
Enfora Implementation Scope Full
Notes N/A