Specifications

AT Command Set Reference
Ver. 1.00
GSM1308AT001 Page 48 Ver. 1.00 – 10/29/2008
2.1.3.7. AT+CLIR Calling Line Identification
Restriction (continued)
Parameter Values
<n> (parameter sets the adjustment for outgoing
calls)
0 presentation indicator is used according
to the subscription of the CLIR service
1 CLIR Invocation
2 CLIR suppression
<m> (parameter shows the subscriber CLIR
service status in the network)
0 CLIR not enabled
1 CLIR enabled in permanent mode
2 Unknown (e.g. no network, etc.)
3 CLIR temporary mode presentation
restricted
4 CLIR temporary mode presentation
allowed
Reference GSM Ref. 07.07 Chapter 7.7
Standard Scope Optional
Enfora Implementation Scope Fully
Notes N/A