Specifications

AT Command Set Reference
Ver. 1.00
GSM1308AT001 Page 43 Ver. 1.00 – 10/29/2008
2.1.3.5. AT+CPWD Change Password
(continued)
<oldpwd> Password specified for the facility. If an old
password has not yet been set, <oldpwd>
is not entered
<newpwd> “new password”
Reference GSM Ref. 07.07 Chapter 7.5
Standard Scope Optional
Enfora Implementation Scope Partial
Notes In order to change the password, the
applicable facility must be enabled. See
AT+CLCK.
Example:
Enter first password for Network Personalisation:
AT+CPWD=”PN”,,”xxxx”
Password for Network Personalisation
Network Personalisation
To change SIM PIN:
AT+CPWD=”SC”,”xxxx”,”yyyy”
New password
Old password
SIM PIN