Specifications

AT Command Set Reference
Ver. 1.00
GSM1308AT001 Page 36 Ver. 1.00 – 10/29/2008
2.1.3.3. AT+COPS Operator Selection
(continued)
Parameter Values
<mode> 0 automatic (<oper> field is ignored)
1 manual (<oper> field shall be
present)
2 deregister from network
3 set only <format> (for read
command +COPS?), do not attempt
registration/deregistration (<oper>
field is ignored); this value is not
applicable in read command
response
4 manual/automatic (<oper> field shall
be present); if manual selection fails,
automatic mode (<mode=0) is
entered
.
<format> 0 long format alphanumeric <oper>
1 short format alphanumeric <oper>
2 numeric <oper>; GSM Location
Area Identification Number
<oper> operator in format as in per <format>
<stat> 0 Unknown
1 Available
2 Current
3 Forbidden
Reference GSM Ref. 07.07 Chapter 7.3
Standard Scope Optional
Enfora Implementation Scope Partial
Notes