Specifications

AT Command Set Reference
Ver. 1.00
GSM1308AT001 Page 396 Ver. 1.00 – 10/29/2008
4.16.23. $MSGSND Message Send
Command Function The $MSGSND command has been
created to allow sending of data from
one mode to another.
Command Functional Enfora Specific
Group
Command Format Query AT$MSGSND=?
Response $MSGSND: (0-4),("ASCII DATA")
OK
Write Format N/A
Response N/A
Read Format N/A
Response N/A
Execution Format AT$MSGSND=<destination>,<”data”>
Response OK
Parameter Values
<destination> 0 – 4 (possible Valid Values)
0 = <”data”> is sent out the serial port
1 = <”data”> is sent to all SMS addresses
listed in AT$SMSDA command.
2 = <”data”> is sent via GPRS to first IP
address, configured as server, in
AT$FRIEND command and port number
defined by AT$UDPAPI command
3 = <”data”> is sent via GPRS to IP address
and Port number listed in the AT$PADDST
command
4 = <”data”> is sent via GPRS to first IP
address, configured as server, in
AT$FRIEND command and port number for
TCP API values